Compare quotes from local providers for pool pumps, heaters, chlorinators and filters, typically A$200–A$1000 depending on the job. Get matched within days, no obligation to book.
Takes under a minute. No phone call required.
Pick a state to see a sample of the suburbs we reach. Not on the list? We almost certainly still cover you — just ask.
The Pool Quotes lists Pool Cleaning providers working across VIC — compare quotes for your street before you book.
Every suburb linked here has its own page with local pricing and availability. Not listed? Send the job through anyway — coverage is wider than the sample.
The Pool Quotes lists Pool Cleaning providers working across State — compare quotes for your street before you book.
Every suburb linked here has its own page with local pricing and availability. Not listed? Send the job through anyway — coverage is wider than the sample.
No suburb matches that. Try fewer letters, or send the job through — coverage is wider than this sample.
Reviews collected from real customers and entered by the site owner.
I've been using The One Pool Care Elsternwick for the past 2.5 years and have been extremely happy with their service. They are reliable, professional, knowledgeable and always responsive when needed. My pool is consistently maintained to a very high standard and any issues are dealt with promptly and honestly. It's reassuring knowing my pool is being looked after properly. I would highly recommend them to anyone looking for dependable and professional pool care.
This pool care company is amazing, they really care. Zena has been servicing our pool for over a year. His knowledge of our old pool system is exceptional. The service is fantastic and their pricing is reasonable. All of the team are courteous and always helpful. I highly recommend them.
Pool equipment installation covers fitting or replacing the mechanical parts that keep a pool running: pumps, filters, salt or chlorine dosing systems, heaters and automation controllers. It usually involves plumbing connections to existing pipework, an electrical connection for the motor or control unit, and sometimes a new concrete pad or weatherproof enclosure for the equipment.
In Mulgrave, most pools sit in backyards of brick veneer houses built through the 1970s to 1990s, many with original pumps and filtration still running on ageing wiring and pipework laid decades ago. Swapping in a modern variable-speed pump or a salt chlorinator often means adjusting old plumbing to fit newer fittings, which is where a lot of the labour time actually goes.
Done properly, correct installation protects you from the two costliest outcomes: equipment that fails within a year because it was wired or plumbed incorrectly, and a pump running oversized or undersized for your pool's actual volume, which wastes power and shortens the equipment's life.
An old or undersized pump often needs to run longer hours to filter the same volume of water, which shows up as a higher power bill and is usually fixed with a correctly sized replacement pump.
Weak or failing chlorination is a common cause, and installing a properly sized salt chlorinator or upgrading dosing capacity usually resolves it within days.
Without a heater or with an undersized one, water in Mulgrave's backyard pools often stays below comfortable swimming temperature outside peak summer, which a correctly installed heat pump can address.
Ageing wiring or a pump drawing more current than the circuit was designed for can trip breakers repeatedly, and this is a licensed electrician's job to fix during installation.
Worn bearings or a pump bolted onto an uneven or cracked pad will vibrate and get louder over time, and reinstalling on a proper level base usually fixes it.
Old fittings and unions around the pump and filter can weep water gradually, and replacing these during a pump or filter swap stops the slow loss.
Serving Mulgrave · VIC · Written quotes from listed local providers.
Quotes in 3 simple steps
Describe what needs installing or replacing, whether it's a pump, chlorinator, heater or filter. It takes a couple of minutes and there's no cost to submit.
We connect you with providers who cover Mulgrave and the surrounding City of Monash area. You'll typically hear back from more than one within a day or two.
Review the quotes side by side and ask questions before you commit. You choose who does the work, and you're never obligated to book through us.
Pool equipment installation in Mulgrave typically costs between A$200 and A$1000, depending on what's being fitted and how much rework the existing plumbing or wiring needs. A simple pump swap on modern fittings sits at the lower end, while a heat pump or a job needing new electrical circuits sits higher. Access and the age of the pipework under older Mulgrave homes both affect labour time. Get a few quotes before you book so you're comparing like-for-like scope, not just the bottom-line figure.
Market guidance only — typical ranges for this suburb, not a quote. Your price depends on the specifics of the job and should be confirmed in writing before work starts.
Scope varies a fair bit between providers, so it pays to check exactly what's covered before comparing prices. A quote that looks cheaper on paper can leave out things another provider includes as standard.
Common extras — ask before booking
Ask each provider exactly what's included before you compare quotes, since one price that includes electrical work isn't comparable to one that doesn't.
Melbourne's south-eastern suburbs, including Mulgrave, get hot, dry summers where pools see heavy daily use from December through February, followed by cool, wet winters where equipment sits largely idle. That swing puts real strain on pumps and seals that cycle between constant summer running and months of inactivity, which is when worn bearings and perished O-rings tend to fail.
Most pool pumps in the area need replacing or serviced roughly every 7 to 10 years, and chlorinator cells typically wear out every 3 to 5 years depending on water balance and usage. Booking equipment installation in autumn or winter, before the pump is under summer load, gives a provider time to source the right unit and means you're not without a working pool on the first hot weekend.
A licensed provider does more than bolt on a new unit: they'll size the pump correctly for your actual pool volume, check the existing pipework can handle the new equipment's flow rate, and confirm the electrical connection meets current safety standards before switching it on. That attention to sizing and wiring is what separates a job that lasts a decade from one that fails within the first year.
Mulgrave is a established residential suburb in Melbourne's south-east, within the City of Monash, made up mostly of brick veneer houses on quarter-acre blocks from the 1970s and 1980s alongside newer townhouse infill closer to Wellington Road and Springvale Road. Pools here are typically in-ground concrete or fibreglass, installed either with the original build or added in the 1990s and 2000s, which means a lot of the equipment currently in backyards is original or a first-generation replacement.
Access is the main local variable: older Mulgrave blocks often have side gates as the only route to the backyard, sometimes with a narrow path between the house and the fence line, which affects how easily a provider can bring in a new pump, filter or heat pump unit. Some pools sit below deck level or behind a raised timber pergola area, adding time to remove and refit an equipment enclosure. Providers who regularly work in the area factor this into their quote rather than discovering it on the day.
Providers matched through this site who service Mulgrave typically also cover the surrounding City of Monash suburbs, including Wheelers Hill, Glen Waverley, Mount Waverley, Springvale and Notting Hill, so the same quote comparison applies whether your pool is near Waverley Gardens Shopping Centre or closer to the Jells Park end of the suburb.
Pool equipment installation in Victoria often involves both plumbing and electrical work, and each is regulated separately. Checking credentials before you book protects you if something goes wrong with the wiring, the plumbing, or the pool's safety compliance later.
Plumbing work on pool pipework in Victoria must be carried out by a licensed plumber registered with the Victorian Building Authority (VBA), and electrical connections to pumps, heaters or chlorinators must be done by an electrician licensed through Energy Safe Victoria. Some providers hold both trades or work as a team to cover the full job.
A quote is only useful if you can trust the person doing the work, so check a few practical things before you book.
Ask for VBA plumbing and Energy Safe Victoria electrical licence numbers if the job involves both trades, and check them on the public registers before booking.
Mention if your backyard is side-access only or has a raised deck, since this affects both the quote and how long the job takes on the day.
A written quote should name the specific pump, heater or chlorinator model being installed, not just a category, so you know exactly what you're paying for.
Confirm whether disposal of the old unit, a new equipment pad, or electrical upgrades are included in the price or billed separately.
Most new pool equipment carries a manufacturer's warranty, and you should ask separately what workmanship warranty the provider offers on the installation itself.
Getting more than one quote for the same scope of work is the clearest way to spot if a price is unusually high or missing something another provider includes.
If you want the pool ready for summer, ask directly when the provider can start and how long the job will realistically take, especially during the busier spring booking period.
Late autumn through winter, roughly April to August, is typically the quietest period for pool equipment installation in Mulgrave, which usually means shorter waits and more provider availability. Spring bookings pick up as homeowners get pools ready for summer, and December through February is peak season when both prices and wait times tend to rise.
Demand peaks as pools are in daily use and any equipment failure needs fixing fast, so wait times and prices are typically at their highest.
Bookings ease off through March before quieting further by May, making it a reasonable window to get quotes without summer pressure.
This is usually the quietest and most flexible time to book, with providers often able to schedule installation within days rather than weeks.
Demand rises sharply as homeowners prepare pools for the season ahead, so booking early in September avoids the pre-summer rush.
Book your installation in winter if you can, since you'll typically get faster scheduling and more time to compare quotes before the spring rush pushes prices and wait times up.
Pool Equipment Installation in Mulgrave — common questions
Real feedback from customers we have matched
“I've been using The One Pool Care Elsternwick for the past 2.5 years and have been extremely happy with their service. They are reliable, professional, knowledgeable and always responsive when needed. My pool is consistently maintained to a very high standard and any issues are dealt with promptly and honestly. It's reassuring knowing my pool is being looked after properly. I would highly recommend them to anyone looking for dependable and professional pool care.”
A customer Elsternwick · Pool Maintenance“This pool care company is amazing, they really care. Zena has been servicing our pool for over a year. His knowledge of our old pool system is exceptional. The service is fantastic and their pricing is reasonable. All of the team are courteous and always helpful. I highly recommend them.”
A customer · Pool MaintenanceThe Pool Quotes connects you with independent local providers who've opted in to quote on jobs in your area. You compare their quotes and decide who to book, with no pressure and no obligation.
Every provider listed has actively chosen to quote on jobs in the Mulgrave and City of Monash area, rather than being cold-called or added without consent.
Your request is matched against providers who actually service Mulgrave's postcode, not a generic Melbourne-wide list.
You receive multiple quotes for the same job description, so you can compare price and scope directly instead of ringing around yourself.
Getting a quote through the platform doesn't commit you to hiring anyone, so you can walk away if none of the quotes suit.
From single homes to large commercial sites, The Pool Quotes covers pool equipment installation for every kind of property in Mulgrave.
Tell us what needs installing and get matched with local providers, with no obligation to book.
Get 3 Free Quotes🔒 Your details are never sold — we only match you with local providers.
The Pool Quotes is a free quote-matching service. We are not a Pool Cleaning business and do not carry out the work ourselves.
What it costs, what's included, and what to ask.
Whether you're a sole trader, a small crew or an established company — create a free listing and let Mulgrave customers find you.
Free, fixed and written — approved by you before any work begins.