Get matched with vetted local providers for pool pumps, chlorinators and heaters. Most jobs in Brighton run A$200–A$1000, and quotes are free with no obligation to book.
Takes under a minute. No phone call required.
Pick a state to see a sample of the suburbs we reach. Not on the list? We almost certainly still cover you — just ask.
The Pool Quotes lists Pool Cleaning providers working across VIC — compare quotes for your street before you book.
Every suburb linked here has its own page with local pricing and availability. Not listed? Send the job through anyway — coverage is wider than the sample.
The Pool Quotes lists Pool Cleaning providers working across State — compare quotes for your street before you book.
Every suburb linked here has its own page with local pricing and availability. Not listed? Send the job through anyway — coverage is wider than the sample.
No suburb matches that. Try fewer letters, or send the job through — coverage is wider than this sample.
Reviews collected from real customers and entered by the site owner.
I've been using The One Pool Care Elsternwick for the past 2.5 years and have been extremely happy with their service. They are reliable, professional, knowledgeable and always responsive when needed. My pool is consistently maintained to a very high standard and any issues are dealt with promptly and honestly. It's reassuring knowing my pool is being looked after properly. I would highly recommend them to anyone looking for dependable and professional pool care.
This pool care company is amazing, they really care. Zena has been servicing our pool for over a year. His knowledge of our old pool system is exceptional. The service is fantastic and their pricing is reasonable. All of the team are courteous and always helpful. I highly recommend them.
Pool equipment installation covers fitting or replacing the pump, filter, chlorinator (salt or manual dosing systems), heater, timer or automation controller, and the electrical isolation switch that powers it all. It also includes connecting the new equipment into the existing pipework and, where needed, running new wiring back to the switchboard.
In Brighton, VIC, a lot of this work is replacement rather than new-build, because plenty of pools here were installed decades ago and the equipment has simply worn out or fallen behind current safety standards. Homes closer to the foreshore also deal with salt air off Port Phillip Bay, which corrodes cheaper metal fittings faster than it would inland.
Done properly, equipment installation protects you from three things: electrical shock risk from non-compliant wiring, equipment that's the wrong size for your pool volume and never performs well, and voided manufacturer warranties because the install wasn't done to spec.
A pump that's noisy or hot to touch is often undersized or has worn bearings, and it usually needs replacing rather than repairing.
Poor filtration or a failing chlorinator lets algae take hold, especially once water temperatures climb through a Melbourne spring.
Without a salt or automated chlorinator, you're stuck testing and dosing by hand, which most owners find impractical to keep up with.
Older single-speed pumps run at full power the whole cycle, while a variable-speed pump can cut running costs noticeably over a season.
Ageing wiring or a missing dedicated RCD isolation switch is a common cause, and it's a safety issue, not just an inconvenience.
Without a heat pump or solar boost, Bayside water temperatures drop fast outside peak summer, shortening how long the pool gets used.
Serving Brighton · VIC · Written quotes from listed local providers.
Quotes in 3 simple steps
Describe what needs installing — a new pump, chlorinator, heater or a full equipment swap. It takes a couple of minutes and there's no cost to submit.
We connect you with providers who service the Brighton, VIC area and have the licences needed for the job. You'll typically hear back within a day or two.
Review quotes side by side, ask questions, and pick the provider that suits your budget and timeline. You're never obligated to accept any quote.
Most pool equipment installation jobs in Brighton fall somewhere between A$200 and A$1000, depending on what's being fitted and how much electrical or plumbing work is involved. A single pump swap sits at the low end, while a heat pump with new wiring sits at the high end. The exact price depends on your pool size, equipment brand, and site access. Get a couple of quotes before assuming either figure applies to your job.
Market guidance only — typical ranges for this suburb, not a quote. Your price depends on the specifics of the job and should be confirmed in writing before work starts.
Scope varies between providers, which is exactly why comparing written quotes matters. One quote might include disposal of your old pump; another might charge that as an extra. Ask what's covered before you compare price alone.
Common extras — ask before booking
A cheaper quote that excludes electrical connection or old equipment disposal can end up costing more once those extras are added back in. Ask each provider for a written, itemised quote so you're comparing the same job.
Brighton sits directly on Port Phillip Bay, and the salt-laden air that comes with it corrodes cheaper metal fittings, exposed wiring terminals and pump housings faster than it would in an inland Melbourne suburb. Sandy, shifting soil common near the foreshore can also cause equipment pads to settle unevenly over time, which puts strain on pipe joins if it isn't allowed for.
Most Brighton pools see heavy use from October through to April, with warmer months bringing a higher risk of algae blooms if filtration or chlorination isn't keeping pace. Owners who add a heat pump or solar boost typically stretch usable swimming weeks further into shoulder-season months either side of summer.
A professional installer sizes the pump and filter to your actual pool volume and turnover rate rather than guessing, specifies corrosion-resistant fittings for the coastal exposure, and wires the isolation switch to current electrical safety standards rather than reusing whatever was there before.
Brighton, in Melbourne's Bayside Council area, is a mix of established Edwardian and Californian bungalow-era homes and newer architect-built rebuilds, many within a few streets of Dendy Street Beach and the Church Street shopping strip. Pools here range from older in-ground concrete pools installed decades ago to more recent fibreglass and concrete builds behind renovated period homes.
Access is the recurring issue on older blocks near the foreshore and around Middle Brighton: narrow side paths, established gardens and heritage overlays on some properties can limit where equipment pads can be relocated or how easily new wiring can be run. Sloped backyards near Green Point and blocks backing onto laneways sometimes need extra time for equipment delivery and placement.
Providers matched through this page typically also cover nearby Bayside and inner-south suburbs including Hampton, Sandringham, Elwood and Elsternwick, so if you're just outside Brighton you'll likely still get matched with the same pool of local installers.
Pool equipment installation in Victoria involves electrical and often plumbing work, both of which are regulated trades. Getting this wrong isn't just a compliance issue — incorrect electrical work around a pool is a genuine safety hazard, which is why checking credentials before booking matters more here than for most home repairs.
Any electrical connection, including wiring a pump or heater to an isolation switch, must be done by an electrician licensed through the Victorian Building Authority (VBA). Plumbing connections into existing pipework should be carried out by a licensed plumber registered with the VBA.
A lower quote isn't worth much if the scope, licensing or warranty terms don't stack up. Work through these steps before you commit.
Ask for the electrician's or plumber's VBA licence number and check it against the public register. This takes two minutes and rules out unlicensed operators.
A provider who's sized your pump or heater against your actual pool volume, not a guess, is more likely to get performance right the first time.
Make sure the quote breaks out equipment cost, labour, electrical work and disposal separately. This makes comparing quotes far easier.
Ask what's covered on the equipment itself versus the installation workmanship, and for how long.
Confirm upfront whether removing and disposing of your old pump or heater is included or charged as an extra.
For any electrical work, you should receive a Certificate of Electrical Safety once the job's done. Keep it with your home records.
Getting a handful of quotes for the same job description is the simplest way to spot outliers, both unusually high and suspiciously low.
Autumn and winter, roughly April through August, tend to be quieter for pool equipment installers around Brighton, which usually means shorter waits and more flexible scheduling. Spring and early summer get busy fast as owners rush to have everything running before the pool season starts.
Peak demand as pools are in constant use, so booking urgent repairs can mean a longer wait for a slot.
Demand eases off as the swimming season winds down, making it a practical window for planned equipment upgrades.
The quietest months for bookings, and often the easiest time to negotiate scheduling around your own availability.
Bookings ramp up quickly as owners prepare for summer, so this is the time to get in early rather than wait.
If your equipment is already struggling, book the replacement in autumn or winter rather than waiting until the first hot week of spring when everyone else has the same idea.
Pool Equipment Installation in Brighton — common questions
Real feedback from customers we have matched
“I've been using The One Pool Care Elsternwick for the past 2.5 years and have been extremely happy with their service. They are reliable, professional, knowledgeable and always responsive when needed. My pool is consistently maintained to a very high standard and any issues are dealt with promptly and honestly. It's reassuring knowing my pool is being looked after properly. I would highly recommend them to anyone looking for dependable and professional pool care.”
A customer Elsternwick · Pool Maintenance“This pool care company is amazing, they really care. Zena has been servicing our pool for over a year. His knowledge of our old pool system is exceptional. The service is fantastic and their pricing is reasonable. All of the team are courteous and always helpful. I highly recommend them.”
A customer · Pool MaintenanceThe Pool Quotes matches your job details against a network of providers who cover the Brighton, VIC area, then sends your enquiry to a short list of them. You compare what comes back and decide who, if anyone, gets the work.
Every provider in the network has chosen to list and receive local job enquiries, rather than being scraped from a directory.
Your enquiry is matched to providers who actually work in Brighton and nearby Bayside suburbs, not just anyone across Melbourne.
You typically receive multiple quotes for the same job description, making it easier to compare price and scope like-for-like.
Quotes are free and non-binding, so you can decline all of them if none suit your budget or timeframe.
From single homes to large commercial sites, The Pool Quotes covers pool equipment installation for every kind of property in Brighton.
Submit your job once and get matched with local providers, free and with no obligation to book.
Get Free Quotes Now🔒 Your details are never sold — we only match you with local providers.
The Pool Quotes is a free quote-matching service. We are not a Pool Cleaning business and do not carry out the work ourselves.
What it costs, what's included, and what to ask.
Whether you're a sole trader, a small crew or an established company — create a free listing and let Brighton customers find you.
Free, fixed and written — approved by you before any work begins.